top of page

Permeable Pavers on Clay Soil in London, Ontario: Do They Work?

Oct 26
5 min read

Yes, permeable pavers can work on clay soil, as long as they're designed for it. On clay, a permeable interlocking paver system usually needs a deep open-graded stone base and a perforated underdrain to carry away water the clay can't absorb quickly. Ontario field research found that permeable pavements built over silty clay still cut runoff substantially and kept working through winter.


Permeable pavers are a popular choice for driveways, patios and walkways where water pools or where a homeowner wants to manage more rain on their own lot. This guide explains how they work, what Ontario research found, and what to expect if you're considering them for a London property.


What Permeable Pavers Are


Permeable interlocking concrete pavers look a lot like regular interlock. The difference is in the joints and what's underneath.


  • Wider joints: Pavers have spacers that leave small gaps between units.

  • Open-graded joint stone: Instead of fine sand or polymeric sand, the gaps are filled with small clear stone that lets water through.

  • Open-graded base: Below the pavers is a thick layer of clean, angular stone with lots of empty space between the pieces. That space stores water.

  • Native soil or underdrain: Water slowly soaks into the soil below. On tight soils, a perforated pipe carries extra water away.


Regular interlock is designed to shed water off the surface. Permeable interlock is designed to let water in.


What Ontario Research Found on Clay


The Sustainable Technologies Evaluation Program (STEP), a Toronto-area research partnership, studied permeable pavements in a parking lot built over native soils of silt to silty clay with up to 30% clay. Their permeable pavement technical brief reported that:


  • Over 22 months, the permeable pavements produced 43% less runoff than conventional asphalt.

  • Rain events under 7 mm were fully infiltrated and evaporated.

  • The pavements kept functioning in freezing temperatures, with no surface heaving or slumping.

  • During a large spring thaw, they delayed meltwater outflow and greatly reduced peak flows.

  • Operations staff reported needing to salt the permeable pavements less often than the asphalt.


The study also found that surface permeability dropped over time as joints clogged, and recommended annual vacuum cleaning of permeable interlocking pavers. Even with that decline, the pavements still took in all of the rainfall from observed storms.


For homeowners on London clay, the takeaway is encouraging: permeable pavers don't need sandy soil to help, but they do need the right design and some maintenance.


How Permeable Pavers Are Built on Clay


A permeable system on clay is more involved than a standard interlock patio. A typical build includes:


  1. Locates and layout. Book free utility locates and confirm where water will go.

  2. Deeper excavation. The open-graded base is usually thicker than a standard base because it also stores water.

  3. Subgrade preparation. The clay is shaped so water moves toward the underdrain, and heavy compaction of the native clay is kept in check where infiltration is the goal.

  4. Geotextile where specified. Some designs use fabric to separate the stone from the native soil.

  5. Underdrain. A perforated pipe is set in the stone and carried to a safe outlet.

  6. Open-graded base and bedding layers. Clean stone of different sizes is placed and compacted in layers.

  7. Pavers and joint stone. Pavers are laid, joints are filled with clear stone, and the surface is compacted.

  8. Edge restraint. A solid edge keeps everything locked together.


The underdrain outlet needs the same care as any drainage project. It has to go somewhere safe on your own property and can't create problems for neighbours. See our guide to lot grading in London for the basics of where water can and can't go.


Close-up of paving stones with moss growing in the joints

Permeable vs. Standard Interlock: Comparison


  • Surface water: Standard interlock sheds water to the edges. Permeable interlock lets water soak through the joints.

  • Joint material: Standard uses sand or polymeric sand. Permeable uses small clear stone.

  • Base: Standard uses a dense, compacted granular base. Permeable uses a deeper open-graded stone base that stores water.

  • Drainage on clay: Standard relies on surface slope. Permeable usually needs an underdrain.

  • Maintenance: Standard needs joint top-ups and occasional cleaning. Permeable needs regular cleaning to keep joints open, plus joint stone top-ups.

  • Winter: Both work in Ontario winters when built well. STEP found permeable pavements needed salting less often.


If you're building standard interlock, our guide to interlock base prep for freeze-thaw covers what makes a base last.


Where Permeable Pavers Make Sense


Permeable pavers are worth considering when:


  • A patio or driveway is next to a low spot that floods

  • You want to reduce runoff to a neighbour's yard or the street

  • A walkway crosses a soggy area

  • You're replacing an existing hard surface and want to manage more rain on site

  • Your property has limited space for a rain garden or other feature


They're less suitable where:


  • The surface will get lots of fine sediment, such as next to bare soil or a gravel area

  • There's no safe place for an underdrain outlet

  • The area will see heavy trucks without a design for that load

  • Fuel or chemical spills are likely


If you need to manage water but pavers aren't the right fit, a rain garden designed for clay soil may be a better option.


Maintenance: Keeping the Joints Open


Permeable pavers only work if water can get through the joints. Plan on:


  • Regular sweeping. Keep leaves, grass clippings and sand off the surface.

  • Vacuum cleaning. STEP recommends annual vacuum cleaning of permeable interlocking pavers. Vacuuming restored some, but not all, of the lost permeability in their study.

  • Joint stone top-ups. Replace joint stone lost to cleaning or settling.

  • No sand for traction. Winter sand clogs joints fast. Use other ice-control methods instead.

  • Careful salting. Use salt sparingly. Our post on de-icing salt damage explains why.


Winter in London


Freeze-thaw cycles are hard on any paved surface. A well-built permeable system drains water out of the base rather than holding it near the surface, which helps it handle freezing. In STEP's study, the permeable pavements showed no heaving or slumping and kept taking in runoff through the winter.


Plowing works the same as on regular interlock, but use a plow with a rubber or poly cutting edge or a slightly raised blade to protect the pavers.


Materials From SPM


We supply the clear stone and aggregates used in permeable and standard paver bases. Browse our gravel and aggregates, or call to talk through what your project needs.


FAQ


Do permeable pavers work on clay soil?


Yes, with the right design. On clay, permeable pavers usually need a deeper open-graded stone base and a perforated underdrain. Ontario research on silty clay soils found they cut runoff by 43% compared with asphalt over 22 months.


Do permeable pavers freeze and heave in winter?


Ontario field research by STEP found permeable pavements kept functioning in freezing weather with no surface heaving or slumping, and they continued to take in runoff through winter.


How do you maintain permeable pavers?


Sweep regularly, vacuum clean the joints about once a year, top up joint stone as needed and avoid using sand for winter traction, because it clogs the joints.


Can I use polymeric sand in permeable pavers?


No. Polymeric sand seals the joints, which defeats the purpose. Permeable pavers use small, clean, open-graded stone in the joints.


Are permeable pavers more expensive than regular interlock?


They usually involve more excavation, more base stone and an underdrain, so they often cost more to install. Every site is different, so get a free quote based on your property.


Plan Your Paver Project With SPM


SPM Landscape & Excavation has handled excavation, base prep and drainage around London and southwestern Ontario since 2006. We're WSIB covered and carry $1 million in liability insurance. Call (519) 474-0008 or email spmlandscape@gmail.com for a free quote.


Comments


(519) 474-0008

©2022 by S.P.M Landscape

bottom of page