Snow Stakes Before Winter: How to Mark Your Property for Plowing
Snow stakes are tall, brightly coloured markers placed along driveway edges, curbs, gardens and hazards before winter. Install them in late October or November, before the ground freezes, spacing them every few metres along edges and placing one at every hazard a plow could hit. Once the snow piles up, they show the operator exactly where the pavement ends, protecting your lawn, gardens and the plow itself.
A single missed driveway edge can mean a torn-up lawn, a broken sprinkler head or a damaged plow blade. This guide explains what to mark, how to install stakes and how to make sure your snow contractor knows your property.
Why Snow Stakes Matter
After a big storm, driveways, lawns and garden beds all look the same. Without markers, a plow operator has to guess where the edges are, often in the dark. Stakes help:
Protect lawns. Plows that drift onto the grass scrape away sod and soil, leaving damage you'll find in spring.
Protect gardens and shrubs. Beds and low shrubs next to the driveway get buried or crushed.
Protect hardscapes. Interlock edges, curbs, steps and walkways can be chipped or lifted.
Protect equipment. Hitting a hidden rock, curb or valve can damage a plow blade or truck.
Speed up clearing. Operators work faster and more safely when they can see the boundaries.
What to Mark
Walk your property and mark anything a plow, snowblower or shovel could damage or hit:
Both edges of the driveway, especially on curves
Where the driveway meets the lawn, garden beds or a ditch
Curbs, landscape edging and interlock borders
Walkways and steps that will be cleared
Garden beds and shrubs next to paved areas
Water shut-off valves, cleanouts and irrigation heads
Large rocks, boulders and landscape features
Fire hydrants near your driveway
Septic tank lids and septic beds on rural properties
Culverts and ditch crossings
Low walls, light posts and mailboxes
If you have irrigation, mark the heads closest to the driveway. Our guide to winterizing outdoor taps and irrigation covers getting the system ready for winter.
Types of Snow Stakes
Most stakes fall into a few types:
Fibreglass rods: The most common choice. They flex when hit and spring back, and they hold up for several seasons.
Plastic stakes: Cheaper, but they can crack in deep cold or snap when a plow catches them.
Wooden stakes: Easy to find, but they rot, break and are hard to see unless painted or flagged.
Reflective stakes: Stakes with reflective tape or caps are easier to spot at night, when most plowing happens.
Whatever you choose, tall and bright is the goal. A stake that disappears under the first big snowbank isn't helping anyone.
How to Space Snow Stakes
There isn't one rule for every property, but these guidelines work for most homes:
Straight driveway edges: Place stakes every few metres along both sides.
Curves: Place them closer together so the shape of the curve is clear.
Corners and transitions: Put a stake at every corner and where the driveway changes direction or width.
Hazards: Put one stake at each individual hazard, on the side the plow approaches from.
Entrances: Mark both sides where the driveway meets the road.
Set stakes slightly back from the pavement edge, on the lawn or bed side, so the plow blade doesn't snap them.

How to Install Snow Stakes
Choose the right stakes. Pick a height that will stay visible above the snow piles you usually get, and a bright colour such as orange or red.
Install before freeze-up. Late October and November are ideal in southwestern Ontario. Once the ground freezes, stakes are hard to push in.
Make a pilot hole. On firm clay, use a steel rod or a drill to make a pilot hole so the stake goes in straight.
Set them deep enough. Push stakes in far enough that wind and snow won't knock them over.
Check sightlines. Make sure stakes are visible from where the plow enters.
Re-check after storms. Straighten or replace any that get knocked down.
Before pushing stakes or rods deep into the ground near utility lines, check where your gas and water services run. For any real digging, book free locates through Ontario One Call, now operating as the Ontario Dig Authority.
Common Snow Stake Mistakes
Waiting too long. By December, frozen ground makes installation a struggle.
Placing stakes on the pavement edge. Plows snap them. Set them back on the lawn or bed side.
Using stakes that are too short. Short stakes vanish once the first snowbank builds up.
Spacing them too far apart on curves. The operator can't tell where the curve goes.
Forgetting the hazards. Driveway edges get marked, but valves, rocks and irrigation heads get missed.
Leaving them up all year. Pull stakes in spring so they don't get hit by the mower.
Walk the Property With Your Contractor
The best results come from a quick walk-through before the season starts. Show your contractor the edges, hazards and where snow should be piled. Point out anything new since last winter, such as a new garden bed, a moved fence or fresh sod. A few minutes in November can prevent a spring repair bill.
Snow Stake Checklist
Driveway edges marked on both sides
Curves and corners marked closely
Walkways and steps marked
Garden beds and shrubs marked
Valves, cleanouts and irrigation heads marked
Rocks and landscape features marked
Septic lids and culverts marked on rural lots
Stakes set back from the pavement edge
Stakes tall and bright enough to see over snow piles
Snow contractor walked the property with you
Where Snow Can and Can't Go
Marking your property is also a good time to think about where cleared snow will be piled. A few things to keep in mind:
Not onto the road. Section 181 of Ontario's Highway Traffic Act prohibits depositing snow or ice on a roadway without permission from the road authority. Oxford County news coverage notes that charges can bring fines of $60 to $1,000.
Not on drains or catch basins. Meltwater needs somewhere to go.
Not against the house. Piles against foundations melt toward your basement.
Not on septic beds. Piling heavy snow on a septic bed or driving over it can cause damage.
Not blocking sightlines. Tall piles at the end of a driveway make backing out dangerous.
For commercial properties, our guide to commercial snow site plans covers pile placement in parking lots.
Commercial and Rural Properties
Commercial lots and long rural driveways need more marking than a typical city home. Commercial properties have islands, curbs, accessible parking signs, light poles and drains. Rural properties around London, St. Thomas, Strathroy and Ilderton often have gravel driveways with soft edges, ditches and culverts. On gravel, stakes are especially important because a plow without clear edges can push gravel onto the lawn.
Salt and Your Landscape
Stakes also help your contractor apply salt only where it's needed, instead of across lawn edges and garden beds. Salt damages soil, grass and plants. See our post on de-icing salt damage for ways to protect them.
FAQ
When should I put out snow stakes?
In southwestern Ontario, late October through November is ideal, before the ground freezes. Frozen ground makes stakes hard to install.
How far apart should snow stakes be?
On straight driveway edges, every few metres usually works. Place them closer together on curves and corners, and put one at every hazard a plow could hit.
Which side of the driveway edge do stakes go on?
Set them just off the pavement on the lawn or garden side, so the plow can follow the edge without snapping the stakes.
Can I push snow onto the road?
No. Section 181 of Ontario's Highway Traffic Act prohibits depositing snow or ice on a roadway without permission from the road authority, and charges can lead to fines.
Will my snow contractor install stakes?
Many contractors install or check stakes as part of their service, and they should walk the property with you before the season. Ask what's included when you sign up.
Book Winter Services With SPM
SPM Landscape & Excavation provides snow and ice services for homes and businesses across London and southwestern Ontario. We've been in business since 2006, we're WSIB covered and we carry $1 million in liability insurance. Call (519) 474-0008 or email spmlandscape@gmail.com to get on our schedule.




Comments