top of page

Basement Egress Windows in London, Ontario: Excavation and Code

6 days ago
6 min read

A basement bedroom in Ontario needs an egress window unless the room has a door directly to the outside. The window needs an unobstructed opening of at least 0.35 m², with no dimension less than 380 mm, and it must open from the inside without tools. If the window sits below grade, the window well needs at least 550 mm of clear space in front of it. In London, cutting a new window opening or enlarging an existing one requires a building permit.


The digging, foundation exposure, drainage and backfill outside the house are the parts an excavation contractor handles. This guide explains the code basics, the permit, and what the excavation looks like on a typical London home.


Why Egress Windows Matter


An egress window is a second way out if a fire blocks the stairs. Basements are where many homeowners add bedrooms, home offices and secondary suites, and they are also where escape is hardest. The code requirements exist so a person can climb out, and so a firefighter can get in.


They matter for resale too. Buyers, appraisers and home inspectors look closely at basement bedrooms. A room that is called a bedroom but has a small, high hopper window may raise questions during a sale. Doing the window properly, with a permit, avoids that.


Ontario Building Code Basics for Bedroom Windows


Municipal guides that summarize Ontario Building Code Article 9.9.10.1, including the City of Ottawa egress window advisory, list these core requirements:


  • Opening size: an unobstructed open portion of at least 0.35 m² (about 3.8 sq. ft.).

  • Minimum dimension: no width or height less than 380 mm (15 in.).

  • Operation: openable from the inside without tools.

  • Window well clearance: at least 550 mm (about 22 in.) of clearance in front of the window, with a continued path out of the well.

  • Deep wells: where a window well is more than 1000 mm deep, a means of helping the occupant climb out, such as a ladder or steps, is needed.


Guides also note that a sash that swings into the well must not reduce the required clearance. The building code is the final word, and your building permit review will confirm the details for your design. Treat this list as a planning guide, not a substitute for the plans examiner.


A common surprise: the size printed on a window's label is the frame size, not the clear opening. A casement or large sliding window usually works best. Measure the actual open space when the sash is fully open.


Do You Need a Building Permit in London?


Yes, in most cases. The City of London's building permit page lists "new or enlarging existing windows" as work that needs a permit. A same-size replacement window does not. The same list includes underpinning foundation walls and below-grade entrances or basement walkouts, which often come up in the same renovation.


If you're creating a secondary suite, more requirements apply beyond the window. Talk to the City or a designer before you commit to a layout.


What the Excavation Involves


Cutting a larger opening in a poured or block foundation wall is structural work, usually done by a foundation or concrete-cutting specialist. Outside, the excavation prepares the ground for the new window well. A typical sequence:


  1. Utility locates. Request free locates through Ontario One Call before digging. Gas meters, hydro and cable lines are often on the same wall as basement windows.

  2. Layout. Mark the well size so the finished well gives the 550 mm clearance and a comfortable climb-out.

  3. Dig to below the sill. Dig out the well area to below the new sill height. Leave extra depth for a drainage layer.

  4. Protect the foundation. Inspect the exposed wall, and repair damp-proofing or waterproofing where it has been disturbed.

  5. Install drainage. Run a drain at the bottom of the well to the weeping tile, or set it in a bed of clear stone, so water never pools against the glass.

  6. Set the window well. Install a galvanized steel, composite or masonry well, anchored to the foundation.

  7. Backfill and compact. Backfill around the well in compacted layers to limit settling. See our guide to foundation backfill.

  8. Regrade. Slope the surrounding soil away from the house so surface water doesn't run into the well.


Unfinished basement with exposed joists, support posts and stairs before a bedroom renovation

Window Well Types Compared


  • Galvanized steel wells: the most common and most affordable choice. They are corrugated, easy to install and fine for standard depths, though they look utilitarian.

  • Composite or plastic wells: often lighter in colour, which brightens the basement. Some come with built-in steps, which helps with deeper wells.

  • Stone, block or timber wells: built like small retaining walls. They can be tiered with plantings and look great, but they take more space and cost more to build.


Whatever you choose, it has to provide the required clearance and drain properly. A good-looking well that holds water is a liability.


Drainage Is the Make-or-Break Detail


A window well is a hole beside your foundation. If water can't drain from the bottom, the well fills during a thaw or a heavy rain and puts pressure on the window. London's clay soils drain slowly, which makes this detail more important.


Good practice includes:


  • A drain or clear stone base at the bottom of the well

  • The top of the well set slightly above the finished grade

  • Surrounding ground sloped away from the house, as covered in our lot grading guide

  • Downspouts pointed well away from the new well

  • A cover to keep out snow and leaves. Check with the building department that the cover you choose still allows easy escape.


What Affects the Cost of an Egress Window Project


Every house is different, so we give free on-site quotes rather than guessing. The main factors are:


  • How deep the window sits below grade, and how big the well needs to be

  • Foundation type: poured concrete or block

  • Access for equipment, or whether the dig has to be done by hand

  • Obstacles such as decks, gas meters, air conditioners or tree roots

  • Drainage connection to the weeping tile

  • Restoration: interlock, garden beds or sod around the well


Egress Window Planning Checklist


  • Confirm the room will be used as a bedroom, or may be in future.

  • Check the window's clear opening against 0.35 m² and the 380 mm minimum dimension.

  • Plan a well with at least 550 mm of clearance in front of the window.

  • Plan a ladder or steps if the well will be more than 1000 mm deep.

  • Apply for the London building permit before cutting the wall.

  • Book locates through Ontario One Call.

  • Plan the drain connection and the regrading.

  • Plan restoration: topsoil, sod or landscaping around the new well.


Can Egress Excavation Be Done in Late Fall or Winter?


Often, yes. A window well is a small, contained dig, and in southwestern Ontario it can usually go ahead into late fall and during milder winter stretches. Frozen ground slows digging and backfill can't be compacted while frozen, so finishing touches like topsoil and sod are usually left until spring. If you're finishing the basement over the winter, getting the opening and well done before deep frost is a smart plan.


How SPM Helps


SPM Landscape & Excavation handles the outside work: locates coordination, careful digging next to the foundation, drainage stone, backfill, grading and lawn restoration. We work alongside your foundation cutter, window installer and general contractor. Browse our excavation and landscaping services, or see finished work in our photo gallery.


FAQ


What size does a basement egress window have to be in Ontario?


Municipal guides based on the Ontario Building Code list an unobstructed opening of at least 0.35 m², with no dimension less than 380 mm, openable from the inside without tools.


How much clearance does a window well need?


At least 550 mm in front of the window, with a continued path out of the well. A well deeper than 1000 mm needs a way to help someone climb out.


Do I need a permit to enlarge a basement window in London, Ontario?


Yes. The City of London lists new windows and enlarged window openings as work that requires a building permit. A same-size replacement does not.


Does every basement bedroom need an egress window?


Under the code, a bedroom needs an egress window unless it has a door directly to the outside. Check your exact layout with the building department.


How do you stop a window well from flooding?


Provide drainage at the bottom of the well, set the top above grade, slope the soil away from the house and keep downspouts away from the well.


Book Your Egress Window Excavation


SPM Landscape & Excavation has worked on London properties since 2006. We're WSIB covered and carry $1M in liability insurance. Call (519) 474-0008, email spmlandscape@gmail.com, or visit us at 791 Manchester Rd, London ON.


Comments


(519) 474-0008

©2022 by S.P.M Landscape

bottom of page