Fibreglass, Vinyl or Concrete Pool Removal: What Changes by Pool Type
Every inground pool comes out with the same basic steps: drain, demolish, haul, backfill, compact and grade. What changes is how much material has to be broken and trucked away. Vinyl liner pools are usually the simplest to remove, fibreglass shells are cut into sections and lifted out, and concrete or gunite pools take the most demolition, which is why pool type has a big effect on schedule and price.
Plenty of London homeowners inherited their pool from a previous owner and aren't sure what they have. This guide explains how to tell, what each type means for the removal, and what to ask before you book a contractor.
How to Tell What Kind of Pool You Have
Before anyone quotes your job, they need to know what's under the water. Here are the usual signs:
Vinyl liner: The inside surface is a soft, flexible sheet, often with a printed tile or stone pattern along the waterline. You'll usually see faceplates around the skimmer and return jets where the liner is clamped. Behind the liner are steel or polymer wall panels.
Fibreglass: The surface is hard, smooth and glossy, with no seams across the floor. The pool was usually delivered as one moulded shell and set into the hole by crane.
Concrete (gunite or shotcrete): The surface is hard and slightly rough, usually finished with plaster, paint, aggregate or tile. Tapping the wall feels solid, and the pool may have an irregular shape that a moulded shell couldn't make.
If the pool has been relined or resurfaced, the surface can be misleading. Check old renovation records, ask the previous owner, or have a contractor confirm on a site visit.
Vinyl Liner Pool Removal
Vinyl liner pools are built from thinner parts: a liner, a ring of wall panels held up by braces, a coping cap and a base of sand or a cement-type mix. That makes them the lightest pools to take apart.
A typical vinyl removal looks like this:
Drain the pool and cut out the liner.
Remove the coping and break up the concrete deck or collar around the pool.
Unbolt or cut the wall panels and braces and pull them out.
Dig out or break up the floor base and remove plumbing lines and equipment.
Backfill, compact and grade.
Because the walls are mostly metal or plastic panels, full removal is usually practical. The metal can often be separated for recycling. The liner and plastic parts go for disposal.
What to watch for with vinyl pools
Rusted wall panels and braces that crumble when they're pulled
Concrete footings poured around the base of each wall panel
A cement-type floor base that needs breaking rather than digging
Buried plumbing lines that run back to an old pump house or shed
Fibreglass Pool Removal
A fibreglass pool is one large moulded shell. It's strong, but it's also bulky, so it can rarely be lifted out whole from a typical London backyard. Most crews cut the shell into manageable sections with saws and lift each piece out with an excavator.
Fibreglass debris takes up a lot of space in a truck and isn't easy to recycle, so disposal is a bigger part of the job than with vinyl. The deck and coping around the shell still need to be broken and hauled as well.
One more thing to know: an empty fibreglass shell sitting in wet ground can be pushed upward by groundwater. If you drain a fibreglass pool, don't leave it empty for long. Schedule the removal so the shell comes out soon after the water does.
What to watch for with fibreglass pools
High groundwater or wet clay that can lift an empty shell
Tight side yards that limit the size of sections you can carry out
Concrete collars and decks bonded to the top of the shell

Concrete and Gunite Pool Removal
Concrete pools are the heaviest to remove. The walls and floor are reinforced with steel rebar, and the whole structure has to be broken up with a hydraulic breaker mounted on an excavator. That creates a lot of rubble and takes longer than vinyl or fibreglass.
You'll usually choose between two approaches:
Partial removal: The top portion of the walls is broken down, the floor is broken through so water can drain, and the remaining structure is filled in. It means less hauling, but the rest of the pool stays buried.
Full removal: All the concrete and rebar is broken out and trucked away before the hole is backfilled. It's more work, but nothing is left underground.
We explain the trade-offs in detail in partial vs. full pool removal. If you go partial, keep your paperwork, because a buried pool usually needs to be disclosed when you sell. Our guide to selling a home with a filled-in pool covers what buyers and agents ask for.
Side-by-Side Comparison
Here's how the three types compare at a glance:
Vinyl liner: Light to moderate demolition. Debris is mostly wall panels, braces, liner, coping and deck. Full removal is usually practical.
Fibreglass: Moderate demolition. Debris is bulky shell sections plus deck and coping. Full removal is most common, and the shell shouldn't sit empty in wet ground.
Concrete or gunite: Heavy demolition with a hydraulic breaker. Debris is concrete and rebar. Partial or full removal are both options, and full removal means much more hauling.
Every pool is different, so treat this as a starting point. Depth, size, deck type and access matter as much as the pool material.
What Stays the Same for Every Pool
Whatever your pool is made of, a proper removal follows the same core steps. You can see how we do it on our pool removal procedure page.
Get utility locates. Ontario One Call, now operating as the Ontario Dig Authority, provides free locates for buried utilities. Book early, because a single-address request can take up to five business days.
Disconnect services. A licensed electrician should disconnect pool wiring, and a licensed gas technician should handle any gas heater line.
Drain the pool. Follow your municipality's rules on where pool water can be discharged.
Demolish and remove. Break out the deck, coping and pool structure, and separate metal for recycling where possible.
Backfill in layers. Place clean fill in lifts and compact each one, instead of dumping the hole full in one go.
Finish the surface. Add topsoil, grade for drainage, then lay sod or seed.
If fill is coming onto your property, ask where it's from. Ontario's excess soil regulation (O. Reg. 406/19) sets rules for how excess soil is moved and reused, and a reputable contractor should be able to tell you where your fill comes from.
Notes for London and Southwestern Ontario
Much of London sits on heavy clay. Clay holds water and compacts differently from sand, so a poorly compacted pool hole can sink and pond for years. Layered backfill and proper grading matter more here than in sandy areas.
Timing matters too. Late fall is a good window because the pool is already closed for the season and the yard isn't in use. Once the ground freezes, finishing work like sod gets harder. If you're deciding right now, read close or remove your inground pool this fall.
Permit rules vary across London, Middlesex, Elgin, Waterloo Region and Guelph. Check with your local building department before work starts. Our pool removal FAQs cover the questions we hear most.
Questions to Ask Before You Book
Have you removed this type of pool before, and can I see photos?
Will this be a full or partial removal, and will I get written documentation?
Where will the debris go, and will metal be recycled?
What fill will you use, and how will it be compacted?
Who books the locates and arranges the electrical and gas disconnection?
Are you covered by WSIB, and do you carry liability insurance?
FAQ
Which type of inground pool is easiest to remove?
Vinyl liner pools are usually the easiest because they're built from a liner, thin wall panels and a light floor base. Fibreglass shells need cutting, and concrete pools need the most breaking and hauling.
Can a fibreglass pool be removed in one piece?
Sometimes, if there's wide, open access for a crane or large equipment. In most backyards the shell is cut into sections so it can be lifted out and loaded onto trucks.
Is partial removal possible for every pool type?
Partial removal is most common with concrete pools. Vinyl and fibreglass pools are usually removed fully because their walls and shells don't break down the same way. With any partial removal, keep documentation because you'll likely need to disclose it when you sell.
Does pool type affect the price of removal?
Yes. Type, size, depth, deck material and access all change how much demolition and hauling is needed. The best way to know your cost is to get a free quote with a site visit.
Why shouldn't a drained fibreglass pool sit empty?
Groundwater in wet soil can push upward on an empty shell and lift or crack it. If you're removing a fibreglass pool, plan for the shell to come out soon after it's drained.
Get a Free Pool Removal Quote
SPM Landscape & Excavation has been removing pools across London and southwestern Ontario since 2006. We're WSIB covered and carry $1 million in liability insurance. Call (519) 474-0008 or email spmlandscape@gmail.com to book a site visit.




Comments